Reset your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the configurations or are experiencing unexpected performance. Fortunately, resetting your Holosun is factory reset Holosun EPS Carry red dot a easy process that can be achieved in just a few actions.

• Begin by ensuring your red dot sight is activated.
• Identify the small reinitialize button on the side of the unit.
• Utilize a thin tool to press and hold the reset button for approximately 7 moments.
• Release the reset button and your Holosun EPS Carry Red Dot sight will restart.
• The red dot sight should now be returned to its factory settings.

Return to Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to go back to basics, resetting it to its factory configuration is a breeze. First, find the tiny button on the rear of your optic. Then, press and hold it for around ten seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for consistent targeting.

revive your Holosun EPS Carry Back to Action

Is your beloved Holosun EPS Carry experiencing some glitches? Don't despair! A simple factory reset can often resolve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these easy steps:

• Press and hold the power button for approximately 10 seconds.
• The display will flash, indicating that the reset is being performed.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can insert the battery and test your sight's functionality. If you encounter any further problems, don't hesitate to reach out to their technical assistance.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Accomplish these steps carefully to ensure a successful factory reset.

• Beginning with, Activate your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, press the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Erase All Settings on Your Holosun EPS Carry

To Default reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Manual for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Returned to their default values.

Reset your Holosun EPS Carry through a Factory Standard Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the solution. This will return your sight to its original settings, clearing any personalized configurations you've made. To accomplish this reset, follow these easy steps:

• Initially, find the reset switch on your EPS Carry.
• Secondly, engage a small object, like a paperclip, to push the reset lever.
• While maintain the reset switch pressed, activate your EPS Carry.
• You'll flash a message showing that the reset is successful.

Once the reset is complete, your EPS Carry will be back to its factory settings.

Report this wiki page